ATL has designed two slug washers for use on swingover and doubled up milking parlours. Both are made from 316 stainless steel.
The swingover parlour slug wash doubles back 180 degrees over the top of the milk line for approximately 2 metres. It has 2 nipples at the end furthest from the milk line for the entry of wash water and atmospheric air.
The double up parlour slug washer consists of a butterfly valve to shut-off the looped milk line next to the receiver and 2 inlet nipples on the opposite side of the butterfly valve to the receiver for the entry of wash water and atmospheric air.
Both systems are designed to work with the Air Blast Control or the Milk Meter Wash Box which control the inlet of water and air into the system.
Slug washers are available in the following sizes; 50mm (2"), 63.5mm (2.5"), 76.2mm (3") and 101.6mm (4") on swingover parlours.