Pulse-8 Master Pulsation Control

The ATL Pulse-8 master pulsation control is simple and easy to use. It is compatible with most claw, liner and teat cup shell combinations.

The system is designed the fit all types of parlours, new and old, high and low level, and can be used with cows, sheep or goats.

The Pulse-8 control has a built-in power supply able to control up to 40 pulsators, reducing system and installation cost on larger parlours.
pulse8-zoom pulse-8-control pulse8-zoom-1

Pulse-8 Master Pulsation Control

Easy to Use:

  • Pulsation settings are easily adjustable from the front of the box, no fiddling inside
  • Precision settings for pulsation rate and ratio
  • LED display, keys and channel ON indicators on front panel of Pulse-8 control
  • Link to ATL milk meters allowing pulsators to be turned on and off from wash box

Precision Control:

  • Pulsation rate from 30 to 180 pulses per minute (ppm) in 1ppm steps
  • Pulsation ratio selectable in 1% steps from 35:65 to 75:25 (On:Off)
  • Save electricity with the built in 80% efficient switch modem power supply
  • Suitable for any claw pulsation pattern – simultaneous or alternate

Stable Vacuum:

  • Pulse-8 control provides 8 time shifted pulsation periods for ripple pulsation effect
  • Reduces noise by off setting operation of pulsators
  • Spreads out air consumption and removes vacuum fluctuations
  • Provides better pulsation and improves milking

Technical Specifications:

  • Input Voltage – 90-264vAC 47-63Hz built in 300 watt switch mode power supply with over temperature and overload protection
  • Output Voltage – Either nominal 12vDC or nominal 24vDC (specified at time of order)
  • Output Connectors – Up to 8 switched negative and common positives for each channel
  • Display – 5 segment LED display and channel ON indicators for each channel
  • Pulsators/Solenoid Valves – For use with normally open (NO) or normally closed (NC)
  • Channel Capacity – Maximum 37 watts per channel in 8 channel mode or 75 watts per channel in 4 channel mode. Up to 40 pulsators total depending upon pulsator solenoid coil rating
  • Enclosure Dimensions – 200mm x 300mm x 132mm – dimensions do not include glands or switches